Greenix Panel Types

Greenix Panel Types

Selecting Greenix Structural Insulated Panels Types in the design and construction of a building project brings several benefits, such as building simplicity, quality, speed of assembly, and reduced maintenance. Look for these quality differences:

  1. Class 1 Fire Rating (Polyurethane Foam Core)
  2. “Green Building Programs” Qualifier
  3. Volume Production
  4. Span Capabilities, Roof Load, Structural Strength
  5. Volume Buying Power of Foam and Lumber
  6. Surface option delivering 1, 2, 4 hour firewalls
  7. Tongue and Groove Connection, Optional Cam-Lock Connection
  8. Manufactured with Quality Grade Lumber
  9. Time and money saving Pre-cut Top Plates
  10. Optional Polyurethane (10lb.) High Density Rail
  11. Framed and Foamed in the Factory for Quality Control

Illustrated Panel Types

Greenix Wall PanelWall Panel

Maximum width 4′-0″(120 cm). Maximum height 16′-0″(480 cm). Panel thicknesses are 3″ (7.6cm), 4 1/2″ (11.4 cm), and 6 1/2″(16.3 cm). SIP Supply wall panels are built around present construction normal standards. The most common panel is 4′-0″ (120 cm) x 8′-0″ (240 cm) x 4 1/2″ (11.3 cm). Structural components are embedded into each panel providing extra strength and ease of erection. The R-value is approximately 7.25 per inch. Locking devices are embedded at specific intervals providing you with a simple easy method of securing the panels together.

Door and window openings can be pre-engineered into a panel or as a factory option doors and windows can be foamed-in-place.  This reduces construction site waste.

Greenix Corner Panel90° Corner Panel

The 90º Corner Panel can be fabricated as one piece or a two-piece assembly.  Each leg of the corner has a maximum of 2′-4 1/2″ (72 cm) and a maximum height of 12′-0″ (360 cm).   Panel thicknesses are 3″ (7.6cm), 4 1/2″ (11.4 cm), and 6 1/2″ (16.3 cm). The structural capabilities far exceed any traditional building method or other joining methods using two insulated panels butted together to form a corner. The stability of this one piece construction provides additional strength and eliminates panel racking during erection. Locking devices are embedded at specific intervals providing you with a simple easy method of securing the panels together. The insulation is injected polyurethane foam injected at a density of 2.5 lbs/in. giving you an insulating factor of approximately 7.25 per inch. In a 4 1/2″ (11.4 cm) corner panel from SIP Supply you have an insulation (R Factor) of 25. In a 6 1/2″ (16.3 cm) the insulating quality exceeds 40.

Greenix Angle Panel

Angle  Panel

The 135º Angle Panel is a one piece unit. This unique panel allows you to enhance your building architecture while providing structural and insulating capabilities far higher than traditional building methods or other joining methods using insulated panels to form an angle. Locking devices are embedded at specific intervals providing you with a simple easy method of securing the panels together. The insulation is injected polyurethane foam injected at a density of 2.5 lbs/in. giving an insulating factor of 7.25 per inch. In a 4 1/2″ (11.3 cm) angle panel from SIP Supply you have insulation (R Factor) of 25. In a 6 1/2″ (16.3 cm) the insulating quality exceeds R-40.

Greenix Roof Panel

 Roof Panels

SIP Supply Roof Panels can be manufactured in two thicknesses, depending on your insulating requirements:

4 1/2″(11.3 cm) = R25+
6 1/2″ (16.3 cm) = R40+
Maximum Panel length 16′-0″ (480 cm) .
Maximum Panel width 4′-0″ (120 cm).
The insulation is injected polyurethane foam injected at a density of 2.5 lbs/in.

Was this post informative?

Signup today and receive free SIP updates straight in your inbox. We will never share or sell your email address.

Facebooktwittergoogle_pluspinterestlinkedinmail

Add a Comment